Contact Us
EPM 112 West Burke St. Stockbridge, GA 30281 Varied
Scroll Down

Gas & Oilfield Sealing

#Sealing Technical Information

February 14, 2022

Written By:
John Tomme

If you look at the markets around the world today you can see that the gas & oil market is growing at a very fast pace. Due to this rapid growth, there is a high demand for sealing and o-ring needs. EPM Inc. is able to provide seals and o-rings in many different materials to suit the needs of the particular sealing application. We also offer a good stock of inventory in many different materials to keep your sealing needs covered.

Below are a few of the most common o-ring materials we offer:

NBR - 70/90 Durometer

Viton® - 75/90 Durometer

HNBR - 70, 80, 90 Durometer

EPDM - 70 Durometer

Any many other materials!

We also carry other kinds of seals such as Quad-rings(also known as x-rings), Oil Seals (metric & standard sizing), Hydraulic Seals & Pneumatic Seals, and much more for your sealing needs pertaining to gas and oil market.

EPM Inc. is a company known for helping customers no matter what the challenge. If you have a need for more information please contact us or call us at 1-800-659-5050
1
/
7

Related Articles

Cast Iron Piston Rings

EPM Can manufacture Cast Iron Piston Rings fast (typically in 4-6 weeks) PERMASEAL TWIN SEAL Developed specifically to provide the lowest possible leakage of any metallic piston...

Working Conditions (Surface Finish)

Working Conditions SURFACE FINISH The surface finish is very important to provide excellent sealing performance, a low friction and a good seal life. The wear rate is a major factor in the life of a dynamic cylinder,...

Working Conditions (Speed)

Working Conditions SPEEDIt is very difficult to estimate the maximum speed of a dynamic seal, due to the many functions and factors involved, for example working pressure, fluid viscosity, surface finish, and the seal...